Comtrol Hub DeviceMaster Rackmount Shelf Kit User Manual
Comtrol Accessories communication
This manual is related to the following products:
Table of contents
Document Outline
- Rackmount Shelf Kit Installation
- Requirements
- Hardware Included
- Installation Guidelines
- DeviceMaster Installation
- 1. Attach the brackets shipped with the DeviceMaster to the bottom of the unit using the screws.
- 2. Place the DeviceMaster on the shelf, making sure to align the bracket holes on the DeviceMaster with the DeviceMaster mounting holes illustrated.
- 3. Insert the flat head phillips screw from the underside of the shelf and secure the four nuts using a 5/16” nut driver. Make sure that the washers on the nuts are facing the DeviceMaster bracket.
- 4. Align the power supply bracket (5801097 or 5801804, depending on the power supply) with the threaded stub and lip, and slide it into place.
- 1. Attach the brackets shipped with the DeviceMaster to the bottom of the unit using the screws.
- Technical Support