Comtrol Hub DeviceMaster - Manual (Page 118)

118 - Managing the DeviceMaster DeviceMaster Installation and Configuration Guide: 2000594 Rev. A
Managing the DeviceMaster
Checking the NS-Link Version
Use this procedure to check the NS-Link web page version. Remember, an NS-
Link version displays when the NS-Link device driver has been installed and
configured, NS-Link is the same firmware as SocketServer.
1. Start PortVision DX.
2. If necessary, click Scan to locate the DeviceMaster.
The Device List pane displays the NS-Link (SocketServer) version.
3. Check the Comtrol ftp site to see if a later version is available.
To check the NS-Link version, you will need to check to see what version of
SocketServer is available.
You can use this link to check to see what version of SocketServer/NS-Link is
available at:
ftp:/ftp.comtrol.com/dev_mstr/rts/software/SocketServer/.
4. Compare the version number displayed in PortVision DX to the version
displayed in the ftp directory.