Installing portvision dx – Comtrol Hub DeviceMaster User Manual
Page 37
DeviceMaster Installation and Configuration Guide: 2000594 Rev. A
Initial Configuration - 37
Installing PortVision DX
Installing PortVision DX
During initial configuration, PortVision DX automatically detects and identifies
DeviceMaster units, if they are in the same network segment.
Use the Software and Documentation CD that came with the DeviceMaster to
check for the latest version of PortVision DX or use the link below to download the
latest version.
1.
Locate PortVision DX using one of the following methods to download the
latest version:
•
Software and Documentation CD: You can use the CD menu system to
check the version on the CD against the latest released version.
•
FTP site subdirectory:
ftp://ftp.comtrol.com/dev_mstr/portvision_dx
.
Note: Depending on your operating system, you may need to respond to a
Security Warning to permit access.
2.
Execute the PortVision_DX[version].msi file.
3.
Click Next on the Welcome screen.
4.
Click I accept the terms in the License Agreement and Next.