Comtrol Hub DeviceMaster - Manual (Page 163)

DeviceMaster Installation and Configuration Guide: 2000594 Rev. A Troubleshooting and Technical Support - 163
Troubleshooting and Technical Support
5. If necessary, re-open the web pages and click on the port that you want to test.
The following example tests Port 1.
6. Scroll down TCP Connection Configuration options, click the Enable option,
and leave all other settings on this page at their default values.
Note the Port number as it is needed later in this procedure. In this example,
the port number is 8000.
7. Scroll to the bottom of the page and click the Save button.
8. Click Ok when the Port Configuration Updated page appears.