Telnet session – Comtrol Hub DeviceMaster User Manual
Page 121
DeviceMaster Installation and Configuration Guide: 2000594 Rev. A
Managing the DeviceMaster - 121
Managing the DeviceMaster
Accessing SocketServer Commands in Telnet/SSH Sessions (PortVision DX)
You can open a Telnet or SSH session using PortVision DX. Use the appropriate
procedure for your site:
•
•
Telnet Session
Use the following procedure to access a telnet session with PortVision DX.
1.
In PortVision DX, PortVision DX, right-click the DeviceMaster in the Device
List pane for which you want to open a telnet session, and click Telnet/SSH
Session.
2.
Leave the popup set to Telnet and Selected Port 23, and click Ok.
This manual is related to the following products: