Comtrol Hub DeviceMaster - Manual (Page 114)

114 - Managing the DeviceMaster DeviceMaster Installation and Configuration Guide: 2000594 Rev. A
Managing the DeviceMaster
6. Highlight the configuration file and click Open. The configuration file loads in
a few moments.
7. Make the appropriate choice for your situation:
• Click No to the ComtrolApplet message, if you are using the file to set up
multiple DeviceMasters with the same port-level settings.
• Click Yes to the ComtrolApplet
message, if you are using the file
to restore a specific
DeviceMaster. For example, you
needed to remove and then re-
install the DeviceMaster NS-
Link device driver.
8. Click Apply so that the configuration
is saved on the DeviceMaster.
9. Repeat Steps 3 through 8 for each port that you want to restore.