Comtrol Hub DeviceMaster - Manual (Page 67)

DeviceMaster Installation and Configuration Guide: 2000594 Rev. A Socket Port Configuration - 67
Accessing Socket Configuration
Accessing Socket Configuration
There are several ways to access the socket configuration pages. Use the method
that fits your environment best.
• Web Browser
• PortVision DX
Web Browser To access the socket configuration page for the DeviceMaster using a web browser,
follow this procedure.
1. Start your web browser.
2. Enter the IP address of the DeviceMaster in the URL field.
Note: If you do not know the IP address, you can view the IP address in
PortVision DX.
3. Click the port number that you want to configure socket port settings (serial,
TCP connection configuration, and UDP connection configuration).
Note: See the web page Help system, if you need information about configuring
sockets or serial tunneling, which contains detailed configuration
procedures and descriptions for all fields. See
Web Page Help System on
Page 65 for information about downloading the help file separately.
4. Click Save to return to the Server Status page.
5. Optionally, access the following pages to configure additional settings:
a. Click the Network tab to change the network settings.
b. Click the Security tab to enable DeviceMaster security.
c. Click the Email tab to configure email notification services.
d. Click the RFC1006 tab to configure RFC1006 settings.
PortVision DX There are several ways to access the socket configuration page for the
DeviceMaster using PortVision DX.
1. If necessary, start PortVision DX, right-click the DeviceMaster that you want
to configure, and click Webpage.
2. Click the port for which you want to configure socket port settings (serial, TCP
connection configuration, and UDP connection configuration).
Note: For socket configuration information see the Help system. Click the ? in
a configuration area for field specific information or the Help button at
the bottom of the page to view page level help. To locate configuration
procedures, scroll to the top of the Help file and view the Table of
Contents.
3. Click Save to return to the Server Status (main) page.
4. Optionally, access the following pages to configure additional settings.
e. Click the Network tab to change the network settings.
f. Click the Security tab to enable DeviceMaster security.
g. Click the Email tab to configure email notification services.
h. Click the RFC1006 tab to configure RFC1006 (ISO over TCP) settings.