Comtrol Hub DeviceMaster - Manual (Page 110)

110 - Managing the DeviceMaster DeviceMaster Installation and Configuration Guide: 2000594 Rev. A
Managing the DeviceMaster
4. Click Save Configuration.
5. Optionally, change the default file name and click Save.
6. Repeat the previous steps for each DeviceMaster for which you want to save
the driver configuration.
Saving Port-Level
Configuration Use the following procedure to create and save a port configuration file. Port
configuration, must be saved on a port-by-port basis.
1. If necessary, open the Comtrol Drivers Management Console using one of these
methods:
• Windows Control Panel; go to your Control Panel and click the Comtrol
Drivers Management Console.
• Shortcut; located under Start> Program Files> Comtrol> DeviceMaster>
Comtrol Drivers Management Console.
2. Depending on your operating system, you may need to click Yes to the Do you
want to allow the following program to make changes to this computer? User
Account Control message.