Testing ports using port monitor (pmon2), Overview, Testing comtrol com ports – Comtrol Hub DeviceMaster User Manual
Page 153: Overview testing comtrol com ports, 153 fo
DeviceMaster Installation and Configuration Guide: 2000594 Rev. A
Troubleshooting and Technical Support - 153
Troubleshooting and Technical Support
Testing Ports Using Port Monitor (PMon2)
You can use this subsection to test the DeviceMaster driver installation. If you
need to install the device driver, locate the
latest
driver and driver installation
documentation.
Overview
This procedure will check whether the DeviceMaster can:
•
Communicate through the Comtrol device driver
•
Determine if a port is open with an application
Testing Comtrol
COM Ports
If necessary,
on Page 37 to install PortVision DX, which
contains Port Monitor.
1.
Start PortVision DX from the Start menu, select Programs > Comtrol >
PortVision DX > PortVision DX or click the desktop shortcut.
2.
Select Tools > Applications > Port Monitor (PMon2).
3.
Click Add Ports using the icon or Tools > Add Ports,