KEYENCE CV-H5N - Manual (Page 99)

4
CV-H5N-M-WW-NO4-E 4-15
■ File names of saved images
1
Click the [Options] tab in the [Save collected Images]
menu, then set [Image Filename], [Image format] and
[Compression rate].
[Save collected Images]: Options
Note
• The date and time appended to the name of the image file are the date and time on the computer.
• If there is already a file with this name in the save folder, that file will be overwritten.
• When multiple cameras are connected to a CV-5001 Series controller and serial numbering is turned on, each camera will
have its images saved in its own file.
Example: Connection point 1 120081118_120000_00001.bmp
Connection point 1 220081118_120000_00001.bmp
Reference
To access saved images in the simulator, set [Date/time] to on (the default setting) while using the simulator.
Function Settings for Each Function
Name Enter the desired filename.
(Default: connection point name)
Camera number The camera number is sent from the CV-5001 Series controller.
Add date and time Adds date and time.
Maximum serial
number Sets maximum serial number. (default: 999, maximum: 99999)
If the filename exceeds the maximum serial number, it returns to "00000". If there is
already a file with the same name, that file is overwritten.
Apply measurement
count to serial
numbers When this is on, the measurement count sent from the CV-5001 Series controller is
used in place of serial numbers. If there is already a file with this name, that file will be
overwritten.
Save format Images can be saved as either BMP files or PNG files.
Compression Ratio The compression ratio specified in the CV-5001 Series controller output settings takes
precedence over the compression rate on the software.
This can only be set when there is no compression ratio set on the CV-5001 Series
controller. Select from 1/1 (no compression), 1/2, 1/4 or 1/8
1