KEYENCE CV-H5N - Manual (Page 116)

4
CV-H5N-M-WW-NO4-E 4-32
Reference
Automatic update of the setting file that the ShapeTrax mode is included
When “ShapeTrax” is included for the measurement method of the setting file that is edited on the simulator, “ShapeTrax” will be
updated to “ShapeTrax2” when the setting file is loaded.
When saving the setting file, the dialog to confirm whether to save the setting file before updating as a backup file appears.
When the [OK] button is clicked, the following confirmation dialog appears.
When the [OK] button is clicked, the completion dialog appears.
The backup file is saved in [setting] folder in the Virtual CV with the following name.
cvset.dat_date of 12 digits (yy/mm/dd/hh/mm/ss)