KEYENCE CV-H5N - Manual (Page 128)

4
CV-H5N-M-WW-NO4-E 4-44
Loading “Trigger” Image Data into the Simulator
This section explains how to load “Trigger” image data into the simulator from a computer drive folder (including
removable media) or a CV-5001 Series controller.
■ Reading data into the simulator from the computer.
1
Select [Import test images] from the [Simulator] menu.
The [Import Test Images] menu appears.
Note
This function is not available while collecting data.
Suspend data collection before proceeding with the simulator.
1 Folder name
Displays the name of the folder where image data will
be stored. Displays the name of the folder set in
[Location of Test Images] under [Camera/Image
settings] of [Virtual CV settings].
Note
Folder names cannot be changed or deleted from this
menu.
2 Image filename
Displays the name configuration data for the imported images.
Automatically displays the name configuration data
for the imported images in [Specify Test Image files]
under [Camera/Image settings] of [Virtual CV
Settings].
Note
[Prefix] and [Serial number] cannot be changed or deleted from this menu.
3 Camera no.
[Camera no.] can be changed according to the number
of cameras connected in the virtual CV. The imported
images will be assigned to the camera no. set here.
4 Digits in Seq. no.
Changing the initial serial number value will change the
initial serial number used when reading image data.
Note
To import images directly from the CV-5001 controller, make sure
the controller is connected and select the [Import form CV] tab.
1
1
2
4
3
5
2
3