KEYENCE CV-H5N - Manual (Page 141)

4
CV-H5N-M-WW-NO4-E 4-57
4
Select the [Program no.].
The default value is the program number that is currently
used in the CV.
5
Select [Connected CV] for [Program destination].
• Connected CV
Select this to write the program data into the CV-5001
Series controller connected to the computer.
• File
Select this to write the program data into the drive
folder within the computer.
6
Select the option for [File Location].
• CV internal memory
Select this to load a program from the internal memory
of the connected CV-5001 controller.
• CompactFlash card in the CV
Select this to load a program from the CompactFlash
card currently in the CV-5001 controller.
• Current program
Select this to specify the program number currently in
use.
7
Select the [Program no.].
8
Click the [Execute] button.
A confirmation message appears.
9
Click the [Yes] button.
An [End] message appears.
10
Click the [OK] button to return to the main window.
9
10