KEYENCE CV-H5N - Manual (Page 71)

3
CV-H5N-M-WW-NO3-E 3-7
Settings for a 1-to-1 Ethernet Connection
The CV-5001 Series controller can be connected directly to a computer via the Ethernet connection using an
Ethernet cross cable (Keyence part number OP-66843).
Note
Refer to the CV-5001 Series controller manual for more information on CV-5001 Series controller network connection settings.
■ Computer settings before connection (example)
This example uses Windows XP.
1
Select [Network Connections] from the [Control Panel].
2
Right click the "Local Area Connection" icon under
"LAN or High-Speed Internet" heading, then select
"Properties" from the menu that appears.
The [Local Area Connection Properties] window appears.
3
Select "Internet Protocol (TCP/IP)" from "Local Area
Connection Properties", then click the "Properties"
button.
The [Internet Protocol (TCP/IP) Properties] window appears.
4
Select "Use the following IP address", then set "IP
address", "Subnet mask" and "Default gateway".
This example uses "192.168.0.11" for the IP address and
"255.255.255.0" for the subnet mask.
Note
The default configuration settings of the CV-5001 Series is
"192.168.0.10" for the "IP address".
2
3
4