KEYENCE CV-H5N - Manual (Page 132)

4
CV-H5N-M-WW-NO4-E 4-48
■ Loading “Trigger” image data from a connected CV-5001 Series controller
1
Select [Import Test Images] from the [Simulator] menu.
Refer to page 4-44 for more details on loading image data.
Note
• Camera numbers cannot be specified. Image data from all CV-
5001 Series controller cameras will be loaded.
• Select either [Import from PC] or [Import from CV] to change the
initial serial number.
• This function is not available while collecting data. Suspend data
collection before proceeding with the simulator.
2
Click the [Import from CV] tab in the [Import Test
Images] window.
Information about the loaded image data is displayed.
1 Connected CV
The [Connection point] selected in [Connect to] under [Name/Connected CV] of [Virtual CV Settings] is displayed.
2 Name of file to load
An [Image data name] based on the file configuration data (prefix / camera number / serial number digits / initial
serial number) for the file to be loaded is displayed.
Note
When multiple images are specified, the file name of the first image that will be created is displayed.
3
Select a target image and specify the number of images to
transfer.
Select either the most recent image, the most recent OK
image or the most recent NG image. If the most recent image
is selected, enter the number of images to be transferred.
2
4
3
2
1