KEYENCE CV-H5N User Manual

Page 115

CV-H5N-M-WW-NO4-E

4-31

Reference

The setting file normally created by the simulator is compatible with the CV-5001 Series Second Edition and thus cannot be

loaded onto the CV-5001 Series First Edition or the CV-3001 Series Second Edition III/Second Edition II.

When a new program file is required for the CV-5001 Series First Edition or the CV-3001 Series, use the following procedure to

create the proper file format.

Press the [SCR(S)] or [FNC(F)] key and the [ENTER(E)] key while selecting [Execute] under [Add new]. The model and version

selection dialog appears.

Select the desired model and version, then click [OK]. A new program of the specified model/version is created.

Note

The "ShapeTrax" mode cannot be set even with the setting file of the CV-5001 Series First Edition or CV-3001 Series Second

Edition III/Second Edition II/Second Edition.

In such a case, in an environment other than the 64-bit version of Windows 7, after importing the simulator of the CV-5001 Series

First Edition with the [Simulator Import] function, when [CV-5000/5500 First Edition] is selected for [Simulator Version] on the

[Simulator] screen of [Virtual CV Settings], will enable "Shape Trax" Mode settings. Furthermore, in this state, when you want to

create the setting file for the CV-3001 Series Second Edition III/Second Edition II/Second Edition, the setting file compatible with

each edition can be created by the following procedures.

•

Creating a new program file that supports CV-3001 Series Second Edition III

Press the [SCR(S)] + [FNC(F)] keys and the [ENTER(E)] key while selecting [Execute] under [Add new].

•

Creating a new program file that supports CV-3001 Series Second Edition II

Press the [SCR(S)] key and the [ENTER(E)] key while selecting [Execute] under [Add new].

•

Creating a new program file that supports CV-3001 Series Second Edition

Press the [FNC(F)] key and the [ENTER(E)] key while selecting [Execute] under [Add new].

•

If Chinese (Traditional or Simplified) is selected for Language in the Global setting, use the compatible Windows OS (See the

Characters will not be displayed correctly if another Windows OS is used.