KEYENCE CV-H5N User Manual
Page 137
4
CV-H5N-M-WW-NO4-E
4-53
■ Reading program data from a folder within the computer
Read program data that is stored in the C drive of the computer or external removable media.
1
Select [Transfer programs] from the [Simulator] menu.
The [Transfer Programs] menu appears.
Note
This function is not available while collecting data.
Suspend data collection before proceeding with the simulator.
1
Information about [File type] is displayed.
•
Read From
Select either [Connected CV] (connected CV-5001 Series controller) or [File] (a program file in a folder
within the computer). (See step 2.)
•
File Locations
Specify the program file to read from a folder within the computer.
•
File type
Select the data to read from the file type program number. By default, [Program Data], [Registered image],
and [Library Data] are checked.
Refer to the CV-5001 Series controller “User’s Manual” for more details about a specific item.
Note
As a rule, the file should be read using default values (Program data/Registered image/Library data is on, Global data is off).
2
Information about [Read to] is displayed.
•
Virtual CV
The name of the selected Virtual CV is displayed.
•
Save to target/Save to program number
This specifies the program number and the save location. (See steps 4 and 5.)
1