Example 4: saving and displaying ok or ng images, Saving and displaying ok or ng images, Saving and displaying ok or ng images -37 – KEYENCE CV-H5N User Manual
Page 61
2
2-37
CV-H5N-M-WW-NO2-E
Example 4: Saving and Displaying OK or NG Images
This section describes how to save OK and NG images in separate folders and display them on the
computer.
Saving and Displaying OK or NG Images
1. Specifying a connection point
[Edit Connection Settings] menu
1
Select [New connection] or a [(connection name)] from
the [Connections] menu. To set a new connection point,
first set the detailed settings in the [Edit Connection
Settings] menu.
Refer to "Connecting to a Selected Connection Point" (page
4-9) and "Specifying a New Connection Point" (page 4-6).
2. Obtaining output configuration data
1
Select [Acquire output setup data] under the selected
connection from the [Connections] menu to obtain the
data from the CV-5001 Series controller.
Refer to "Obtaining CV-5001 Series Controller Output
Configuration Data from a Computer" (page 3-15)
When output configuration data has been obtained, the
message on the left will appear.
Reference
When importing the image data to the PC, perform the setting
beforehand to output the image with [Image output] in [Output
setup] of the CV-5001 Series.
1