KEYENCE CV-H5N - Manual (Page 66)

3
CV-H5N-M-WW-NO3-E 3-2
Starting Up and Shutting Down
This section explains how to start up and shut down the software.
Starting the Software
1
From the start menu, select [Programs] from the Start menu,
then select [KEYENCE Applications], then [CV-5000 Series],
then [Network Communication Software] and finally [CV-5000
Series Network Communication Software]. Or, from the
Desktop, double click the shortcut for [CV-5000 Series Network
Communication Software].
Initial window
The initial window appears.
Reference
• When the program is started, it will load the last saved program file.
• Double click the saved file to open it and automatically start with
storage activated.
• To set image output for a CV-5001 Series controller, start the
device while operations are stopped.
Shutting Down the Software
1
Select [Exit] from the [File] menu or click the [Close]
button on the upper right of the window.