KEYENCE CV-H5N - Manual (Page 139)

4
CV-H5N-M-WW-NO4-E 4-55
6
Click the [Execute] button.
A confirmation message appears.
Note
All the read target data is overwritten on execution.
Before connecting, make sure that the CV-5001 Series controller is
set to [Run] mode.
7
Click the [Yes] button.
A message will appear indicating that the data has been
successfully loaded.
8
Click the [OK] button to return to the main window.
Reference
Using load target and global data
When global data is loaded from a CV-5001 Series controller, the
program no. currently being used on the simulator will be changed
to the number on the controller.
To set the physical controller to the same program number as the
simulator, first load only the global data. Then close the [Transfer
Programs] menu and load the program data, saved images, and
library data.
7
8