KEYENCE CV-H5N - Manual (Page 57)

2
2-33 CV-H5N-M-WW-NO2-E
Example 3: Displaying Output Data
This section describes how to display output data.
Displaying Output Data
1. Specifying a connection point
[Edit Connection Setting] menu
1
Select [New connection] or a [(connection name)] from
the [Connections] menu. To set a new connection point,
first set the detailed settings in the [Edit Connection
Setting] menu.
Refer to "Connecting to a Selected Connection Point" (page
4-9) and "Specifying a New Connection Point" (page 4-6).
2. Obtaining output configuration data
1
Select [Acquire output setup data] under the selected
connection from the [Connections] menu to obtain the
data form the CV-5001 Series controller.
Refer to "Obtaining CV-5001 Series Controller Output
Configuration Data from a Computer" (page 3-15).
When output configuration data has been obtained, the
message on the left will appear.
1