KEYENCE CV-H5N - Manual (Page 34)

CV-H5N-M-WW-NO2-E 2-10
2
Simulation Using Programs and Image Data on an SD Card
1. Read from the simulator with the SD card (SD2) as the virtual D drive
The procedure for inserting the SD card (SD2) from the CV-5001 series device into the computer and using the
saved data is outlined below.
1
Create a file on the SD card inserted into the CV-5001
series. If there is a program on the SD card, that file will
automatically be saved in a folder with a name
consisting of 3 digits (such as 000 or 150).
The folder is automatically created under [SD card root
folder – cv – setting], as shown below.
2
Take the SD card with the CV-5001 series program
created in step 1 and insert it into the computer.
3
Start the CV-H5N and select [Create/Manage Virtual CVs]
from the [Simulator] menu.
4
Select a Virtual CV, then click the [Edit] button.
Then select “Drive path” from the tab.
Click the [Browse] button next to [K drive location] and
select the drive with the SD card that was inserted in step 2.
SD card root folder
The setting file
“cvset.dat” and the
image file “ref
1.000bmp” are
found here.
Each folder has a
setting folder, which
is associated with
one setting file. CV
Setting
000
001
005
Specify the SD card drive
(in this example, K:), then
click OK.