KEYENCE CV-H5N - Manual (Page 42)

CV-H5N-M-WW-NO2-E 2-18
2
2
Click the [Write to cv] tab.
A The [Write from] information is displayed.
• Virtual CV
This displays the name of the selected Virtual CV.
• Read location / Read location Program No.
Specify the Program No. to be read. (Refer to steps
3 and 4)
B The [Write to] information is displayed.
• Target device
Select [File (Program in computer drive folder)].
[Connected CV] is grayed out when no CV-5001
series devices are connected.
• Target
This specifies the program to be read from the
computer drive folder.
• Target data
This selects the data to be copied from the target
Program no.
3
Select [Write from]
• Simulator C drive
Select this to read Program no. data on the virtual C
drive.
• Simulator D drive
Select this to read Program no. data on the virtual D
drive.
4
Select [Program no.].
The default value is that of the Program no. currently being
used by the simulator.
5
Select [File] under [Program destination].
• File
Select this to read Program no. data from the
computer drive folder.
• * Connected CV
Select this to read Program no. data from a CV-
5001 device connected to the computer.
A
B