KEYENCE CV-H5N - Manual (Page 140)

4
CV-H5N-M-WW-NO4-E 4-56
■ Writing the program data into a CV-5001 Series controller connected to the computer
1
Select [Transfer programs] from the [Simulator] menu.
The [Transfer Programs] menu appears.
Note
This function is not available while collecting data.
Suspend data collection before proceeding with the simulator.
2
Click the [Write to cv] tab.
1 Information about [Write from] is displayed.
• Virtual CV
The name of the selected Virtual CV is displayed.
• Program no.
This specifies the program number that will be transferred. (See steps 3 and 4.)
2 Information about [Write to] is displayed.
• Program destination
Select either [Connected CV] (connected CV-5001 Series controller) or [File] (a program file in a folder
within the computer). (See steps 5 and 6.)
• Connected CV
Name of the CV is displayed that is specified in [Connect to] of [Name/Connected CV] under [Virtual CV
Settings].
• File type
Select the type of program data to write from the file type program number.
Refer to the CV-5001 Series controller “User’s Manual” for more details about a specific item.
3
Select [Write from].
• Drive C of Virtual CV
Select this to write the program number data in the
drive C of the virtual CV.
• Drive D of Virtual CV
Select this to write the program number data in the
drive D of the virtual CV.
1