KEYENCE CV-H5N User Manual

Page 63

CV-H5N-M-WW-NO2-E

2-39

4. Setting file names and compression ratios for image data

Select the [Options] tab from the [Image File Settings]
menu, then set [Image Filename].

Refer to "File names of saved images" (page 4-15).

Image file names can be set as follows.

[Filename] + [Camera no.] + [14 alphanumeric characters
for date and time] (when [Date/time] is on, "_" is inserted
between date and time) + [5-digit serial No. or No. of
measurements (10 digits) sent from a CV-5001 Series
controller] + "bmp"

Note

When multiple cameras are connected to a CV-5001 Series

controller, and sequential numbering is turned on, each camera will

have its images saved in its own file.

Example: Connection point 1 120050401_120000_00001.bmp

Connection point 1 220050401_120000_00001.bmp

Files can be saved in either "BMP" format or "PNG"
format.

Select a compression ration from [Compression rate].

The compression ratio specified in the CV-5001 Series
controller output settings takes precedence.

Save collected Images example

Reference

To access saved images in the simulator, set [Date/time] to off (the

default setting) while using the simulator.

Example file name: Connection point 1120050401_120000_00001.bmp

Connection point name

Camera No.

y/m/d

h/m/s

Serial No. (5 digits) or
No. of measurements
(10 digits)

3
2