KEYENCE CV-H5N - Manual (Page 41)

2
CV-H5N-M-WW-NO2-E 2-17
4. Edit the program file loaded into the simulator
1
Use the keyboard in the same manner as the CV-5001
series console.
The relationship between the console buttons and the
keyboard is shown in table 1.
Refer to the “CV-5001 Series User’s Manual” for information
on CV-5001 series controls.
Note
There is no keyboard key that corresponds to the button on the
under side of the remote (No.7)
2
Save the program edited in step 1.
Note
When “ShapeTrax” is included in the measurement method of the
setting file to be edited, it will be upgraded to “ShapeTrax II” when
the setting file is loaded.
In addition, the setting file before upgrading will be saved as a
backup file when saving the file.
For details, refer to Page 4-32.
5. Write the file edited in the simulator to the drive folder on the computer.
1
Select [Transfer programs] from the [Simulator] menu.
The [Transfer Programs] window appears.
Table 1
Console menu and keyboard controls
Console Keyboard
ENTER Enter
Up n
Down p
Right o
Left m
ESCAPE E/ESC
FNC F
TRG T
SCREEN S
VIEW V
MENU M
PROG/RUN P/R