KEYENCE CV-H5N - Manual (Page 60)

CV-H5N-M-WW-NO2-E 2-36
2
6. Selecting the color and font of displayed characters
[Font/Color] setting example
1
Select the [Font/Color] tab from the [Edit Data Display
Settings] menu, then set [Font], [Font Size] and [Color].
Refer to "Create Output Data Display" (page 4-16).
In this example, [Font] is set to Microsoft Sans Serif, [Font
Size] is set to 16 point, [OK display] is set to black and [NG
display] is set to red.
The settings screen appears as to the left.
Output data display example
After the above settings are made, the output data will be
displayed in the operation window as shown to the left.
When data transfer begins, the output data will be displayed
in the operation window as shown to the left.
Note
If the limit setting is set to calculation reference and special
character for the limits used in the OCR tool, the display color for
the measured value is fixed to the color for the OK result.