KEYENCE CV-H5N - Manual (Page 59)

2
CV-H5N-M-WW-NO2-E 2-35
5. Selecting output data to display
Example of [Data Display setting]
1
Select the [Display settings] tab from the [Edit Data
Display settings] menu, then click the [New] button to set
the items under [Edit Data Display Settings].
Refer to "Create Output Data Display" (page 4-16).
The following data is used as an example here.
• Output Setting: Total status
• Output Type: No. Measurements
• Display Name: Number of total status calculations
(automatic naming)
The log file will appear, as shown to the left.
Note
This does not apply to the CV-5001 Series [Date/Time].
If Chinese (Traditional or Simplified) is selected for Language in the
Global setting, use the compatible Windows OS (See the table on
page 2-5).
Characters will not be displayed correctly if another Windows OS is
used.
2
To display output data, repeat steps 4 and 5.
3
After each item in [Data Display setting] has been set,
the [Edit Data Display Settings] menu will appear as it
does to the left.
Display names can be edited with [Edit], [Delete], [Copy],
[Paste], [
n] and [p].
Refer to "Create Output Data Display" (page 4-16).
Example of [Display setting] from the
[Edit Data Display Settings] menu
3