KEYENCE CV-H5N - Manual (Page 46)

CV-H5N-M-WW-NO2-E 2-22
2
Editing a CV-5001 Series Controller Program File on the Computer
■ Reading program data from the drive folder within the computer
Read program data that is stored in the C drive of the computer or external removable media.
1
Select [Transfer programs] from the [Simulator] menu.
The [Transfer Programs] menu appears.
Note
This function is not available while collecting data.
Suspend data collection before proceeding with the simulator.
1 Information about [File type] is displayed.
• Read From
Select [File] (program data in the drive folder in the computer).
[Connected CV] is grayed out if the connection destination is not set in [Create/manage virtual CVs].
• File Locations
Specify the program file to read from the drive folder in the computer.
• File type
Select the data to read from the program number specified in [File Location]. By default, [Program Data],
[Registered image], and [Library Data] are on.
Refer to the CV-5001 Series controller “User’s Manual” for more details about a specific item.
Note
The file should be read in, as a rule, using default values (Program data/Registered image/Library data are set to on, Global
data is set to off).
2 Information about [Read to] is displayed.
• Virtual CV
The name of the selected Virtual CV is displayed.
• Save to/Program no.
This specifies the program number and the save location. (See steps 4 and 5.)
1
2
3
4
5
2
1
6