Bio-Rad ChromLab™ Software User Manual
Page 246

A
| Maintaining the Instrument
244
| NGC Chromatography Systems and ChromLab Software
20. Route the display cable through the side and rear cable troughs on the
instrument.
21. Locate the cable trough covers and slide mount cover that you removed in
22. Slide the cable trough covers into place and secure them to the back of the
instrument with 6-32 x 1¼" Phillips screws.
23. Insert the side mount cover on the side of the instrument from which you
removed the touch screen.
24. Insert the touch screen cable into the touch screen connector port on the back
of the instrument and tighten the thumbscrews.
This manual is related to the following products: