Appendix g fluor-s multiimager, Appendix g, Fluor-s multiimager – Bio-Rad EXQuest Spot Cutter User Manual

Page 448

Text mode
Original mode

G-1

Appendix G

Fluor-S MultiImager

Fig.G-1. Fluor-S MultiImager.

Before you can begin acquiring images using the Fluor-S

MultiImager, the imaging

system must be properly installed and connected with the host computer. See the
Fluor-S hardware manual for installation, startup, and operating instructions.

Note:

Make sure that the temperature light on the Fluor-S is green before attempting to
capture an image. If you are using a PC, the Fluor-S should be turned on and the
initialization sequence completed before the host computer is turned on. See the
hardware manual for more details.

This manual is related to the following products:

GS-800™ Calibrated Densitometer