Bio-Rad EXQuest Spot Cutter - Manual (Page 224)

Analysis Tools
6-33
Fig. 6-24. Spot number submenu.
With the MatchSet open and active, select Plot SSP Grid ( CNTRL +F9) from the
submenu to display the SSP grid on the Master. Numbered vertical and horizontal
grid lines will appear on the Master.
The grid is helpful for locating spots by SSP number. However, it is an approximation
and should only be used as a guide. If enough spots are added to a single grid block to
use up the 99 available numbers, numbers will be assigned from other blocks.
Display SSPs displays SSP numbers next to every spot in the active window. You
may need to zoom in on the image to be able to read them.