Bio-Rad EXQuest Spot Cutter - Manual (Page 308)

Integrated Excision Tool
9-19
Step 4. Align Analysis and Cutter Images
After you have selected the cut list and the cut run settings, click the Align button.
Fig. 9-8. Place gel on spot cutter dialog.
You will be prompted to place the first gel in the cut list on the spot cutter platform.
Click Gel Ready when you have positioned the gel as shown in the image.
The Align Analysis and Cutter Images dialog box opens. The process of auto-
alignment consists of the following steps:
Step 1: Acquire the image of the gel with the spot cutter camera.
Step 2: Position the data area box in correct position.