Bird Technologies SA-6000EX - Manual (Page 89)

Fault Location Mode
73
Figure 35 Moving Markers
Step Action
1 Press the Marker key to enter marker
setup
2 Press the Mark softkey to select a marker
(1-6)
3 Press the right or left arrow keys to move
the marker right or left, or enter a fre-
quency value on the keypad and press
Enter
4 Press the up arrow key to move the marker
to the highest point on the trace
5 Press the down arrow key to move the
marker to the lowest point on the trace
6 Press the Esc key to return to the test
screen