Bird Technologies SA-6000EX - Manual (Page 106)

Bird Technologies
90
Delete Quicktext
You must be in either Measure Match mode or Fault Location mode to
delete QuickText elements.
1. Press the Save/Recall softkey
2. Press the Label softkey
3. Follow the numbered steps in Figure 50, page 90 to select and
delete QuickText text elements.
Figure 50 Delete a QuickText Element
Step Action
1 Press the right scroll key to select the
QuickText column
2 Press the up or down scroll keys to select a
QuickText text element
3 Press the Delete softkey to delete the
selected text element from the list.
4 Press the Esc key to exit the QuickText list.