Bird Technologies SA-6000EX - Manual (Page 49)

Measure Match Mode
33
Measurement Hold
You must be in either Measure Match mode or Fault Location mode to
hold a trace.
The hold feature stops updating the display at the end of the current
sweep. Press the Hold softkey to hold the displayed trace and press
the Run softkey (the same key) to resume taking measurements. A
measurement is being held when there is a lock icon in the indicator
ball and the Hold softkey changes its name to Run.
If you press the Hold softkey while the unit is in the process of acquiring
data (sweeping), it will not hold the trace until the sweep has finished.
Follow the numbered steps in Figure 11, page 33 to activate or deacti-
vate measurement hold.
Figure 11 Measurement Hold
Step Action
1 Press Hold key to hold the measurement;
press Run key to resume sweeping
2 Lock symbol indicates measurement is
held