Bird Technologies SA-6000EX - Manual (Page 110)

Bird Technologies
94
Save a Setup
You can save the current setup parameters and recall them at a later
time. When you recall a saved setup, the saved values replace the cur-
rent parameters. Saving a setup captures the following values:
Scale Min Start Frequency Center Frequency
Scale Max Stop Frequency Span Frequency
Start Distance Units Calibration Coeff.
Stop Distance FM Status Limit Line
Saving a setup also includes the internal temperature of the Site Ana-
lyzer and the date and time of the save.
You must be in either Measure Match mode or Fault Location mode to
save a setup.
1. Press the Save/Recall softkey
2. Follow the numbered steps in Figure 53, page 95 to save a setup.
Note: Each entry on the saved setup list is identified by a
setup sequence number, the span frequency, the date and time,
and the internal temperature of the Site Analyzer. The
sequence number is automatically generated by the software.
The save setup list can have up to 14 items.
Note: The items on the Save and Recall list are automati-
cally sorted by the text field using the order blank, numeric,
alpha characters.