Bird Technologies SA-6000EX - Manual (Page 19)

Introduction
3
Antenna Test
•
Rejects on-channel interfering signals to +13 dBm.
•
Three user-selectable trace capture options: 238 data points
per sweep, 475 data points per sweep, 949 data points per
sweep.
•
Three graphic display formats: envelope, maximum, mini-
mum.
•
Sweep measurement progress bar: indicates status of mea-
surement being taken.
•
Stores up to 15 setups.
•
Adjustable pass/fail limit with visual indicator.
•
Stores up to 500 sets of measurement data (traces) at the
default setting of 238 data points to facilitate conversion
between Measure Match (Sweep) and Fault Location (DTF).
•
Measurement data can be transferred to the Anritsu Site Mas-
ter Software Tools.
•
On-screen comparison between current measurement trace
and stored data traces – no PC required.
•
Pop-up menus contain over 70 cable types and up to 80 fre-
quency band presets depending upon the instrument model
number.
•
X and Y scales and units are user adjustable.
•
Six markers for either direct or difference measurements. Can
also measure relative to limit line or recalled trace.
•
Measurement hold to temporarily store a trace.
•
Printing capability. The Site Analyzer is compatible with all
printers that use HP PCL Level 3, including most HP printers.
Measure Match Mode
•
Fast swept measurement.
•
Frequency can be set using either Start/Stop or Center/Span
frequencies.
•
Measurement units can be Return Loss [dB], Cable Loss [dB],
or VSWR [ratio].