Bird Technologies SA-6000EX - Manual (Page 67)

Fault Location Mode
51
3. Enter the frequency span. Follow the numbered steps in Figure 20
on page 51 to enter the values you determined in Step 2.
4. Enter the center frequency. The center frequency is the center of
the antenna’s frequency range.
To set the max distance, follow the numbered steps in Figure 20 on
page 51.
Figure 20 Setting the Frequency Span and the Center Frequency
Step Action
1 Press the Config key
2 Press the Freq softkey
3 For both Span and Center, scroll to select
the item (Span or Center)
4 Enter the Span value determined from the
table earlier. Enter the value for the center
frequency as determined in instruction
Step 3.
5 After you enter the Span value, press Enter
After you enter the Center value, press
Enter
6 Press the Mode key
7 Press the Fault Location softkey