Bird Technologies SA-6000EX - Manual (Page 136)

Bird Technologies
120
FM Modulation
The Bird Site Analyzer uses FM modulation to improve its immunity
to interfering signals. Under certain circumstances, such as while
making cable loss or other high reflection measurements with long
cables, FM modulation may reduce signal quality. In that case, the
modulation should be turned off.
•
FM modulation is on by default, and will be turned back on
whenever the unit is reset to defaults.
•
FM modulation is automatically turned off while the unit is in
Cable Loss Mode and returned to its previous state on exiting
Cable Loss Mode.
•
Saving a setup saves the status of the FM modulation.
Toggle
between ON
and OFF
Rtn To
Defaults
FM Mod
Printer
System
Model SA-1700, 25 - 1700 MHz
SN: 00000000
25 Nov 2002
FM Modulation ON
Utility Mode