Bird Technologies SA-6000EX - Manual (Page 112)

Bird Technologies
96
Recall Setup
You must be in either Measure Match mode or Fault Location mode to
recall a setup.
1. Press the Save/Recall softkey
2. Follow the numbered steps in Figure 54, page 96 to recall a setup.
Figure 54 Recalling a Setup
Step Action
1 Press the Setup softkey
2 Press the up and down scroll keys to select
a setup to recall.
3 Press the Recall softkey. The selected
setup parameters are recalled and replace
the current setup in the unit
4 Press the Esc key to exit the Save and
Recall screen