Bird Technologies SA-6000EX - Manual (Page 113)

Save and Recall
97
Delete Setup
You must be in either Measure Match mode or Fault Location mode to
delete a setup.
1. Press the Save/Recall softkey
2. Follow the numbered steps in Figure 54, page 96 to delete a setup.
Figure 55 Deleting a Setup
Step Action
1 Press the Setup softkey
2 Press the up and down scroll keys to select
a setup to delete.
3 Press the Delete softkey. The message
“Are Your Sure?” appears beside the soft-
key. Press the Delete softkey a second
time to confirm the delete or press the Esc
key to cancel the delete.
4 Press the Esc key to exit the Save and
Recall screen