Bird Technologies SA-6000EX - Manual (Page 100)

Bird Technologies
84
Label Text Help
The Site Analyzer has a built-in help screen that describes how to use
the label text feature. To access the label text help, you must be in
either Measure Match mode or Fault Location mode.
1. Press the Save/Recall softkey.
2. Press the Save softkey.
3. Press the Config key.
4. Follow the numbered steps in Figure 45, page 84 to display the
label text help screen.
Figure 45 Text Label Help
Step Action
1 Press the Help softkey to open Help screen
2 Press the Enter key to close Help screen
3 Press the Esc key two times to exit the
configure screen