Bird Technologies SA-6000EX - Manual (Page 26)

Bird Technologies
10
Site Analyzer User Keys
There are two types of keys on the Site Analyzer. The first type,
referred to as a hard key, always has a particular function. The func-
tion of the key does not change and is printed on the unit surface or on
the key itself.
The second type is referred to as a softkey. The five keys at the left of
the display are softkeys. Each softkey has a function which can vary
depending upon the operational mode. The function of the key will be
identified at the left of the display, next to the key.
See Figure 1 and its accompanying table for a description of user keys.
Figure 1 User Key Identification
1. Softkeys Activates the function described
directly to the right of the key.
2. Hard Keys
Mode Activates the mode menu. Use this
to select Measure Match, Fault
Location, Measure Power, or
Utilities mode.
Config Activates the configuration menu for
the current mode. Use this to set
variable parameters (e.g. frequency
band, distance, and units).