Rockwell Automation 20D PowerFlex 700H and 700S Frame 9...14 Drives - Manual (Page 75)

Rockwell Automation Publication PFLEX-IN006E-EN-P - July 2013 75
Frame 10 Mechanical Installation Chapter 6
Figure 24 - Enclosure Code H (NEMA/UL Type 12 - IP54) and W (NEMA/UL Type 12 - IP54 w/
Conformal Coat)
2403.5
198.5
478
655.04
454
606
(19)
(7.8)
(94.6)
(24)
(25.8)
(18)
116 (4.5)
Gap with
Overlapping
Plate Removed
57.2
(2.3)
Standard
73.3 (2.9)
Max.
144.5
(5.7)
439 (17.3)
83 (3.3)
Stationary metal front bottom plate
Two pieces of soft foam taped to adjacent metal p
Overlapping metal bottom plate (slightly adjusta
Stationary metal back bottom plate
NEMA/UL Type 12 Roof
Assembly w/Filters
NEMA/UL
Type 12
External
Filters
Dimensions are in millimeters and (inches).
Wire entry for this enclosure is between two pieces of soft foam. If the adjustable plate is slid back, a
gap develops between the foam pieces. Otherwise, the foam acts as a loose gasket around the wires.