Appendix a - specifications, Appendix a, Specifications – Rockwell Automation 20D PowerFlex 700H and 700S Frame 9...14 Drives User Manual
Page 163: Appendix
Rockwell Automation Publication PFLEX-IN006E-EN-P - July 2013
163
Appendix
A
Specifications
Category
PowerFlex 700H
PowerFlex 700S
Agency
Certification
Listed to UL 508C and CAN/CSA-C2.2 No. 14-M91.
UL and cUL Listed to UL 508C and CAN/CSA - 22.2 No. 14-95.
Marked for all applicable European Directives
(1)
EMC Directive (89/336/EEC)
Emissions:
• EN 61800-3 Adjustable Speed electrical power drive systems
Low Voltage Directive (73/23/EEC)
• EN 50178 Electronic Equipment for use in Power Installations
Marked for all applicable European Directives
EMC Directive (89/336/EEC)
Emissions:
• EN 61800-3 Adjustable Speed electrical power drive systems Part 3
Low Voltage Directive (73/23/EEC)
• EN 50178 Electronic Equipment for use in Power Installations
Certified to AS/NZS, 1997 Group 1, Class A.
Certified to AS/NZS, 1997 Group 1, Class A.
Certified to ATEX directive 94/9/EC. Group II Category (2) GD Applications
with ATEX Approved Motors. Refer to Appendix E Instructions for ATEX
Approved PowerFlex 700H Drives in Group II Category (2) Applications with
ATEX Approved Motors on page
for more information.
Certified to ATEX directive 94/9/EC. Group II Category (2) GD Applications with
ATEX Approved Motors. PowerFlex 700S Phase II Control drives only. Refer to
Appendix E ATEX Approved PowerFlex 700S, Phase II Drives in Group II Category
(2) Applications with ATEX Approved Motors, in publica
for more
information.
(not applicable)
TUV functional safety report only (no FS mark on the label)
The drive is also designed to meet the following specifications:
• NFPA 70 - US National Electrical Code
• NEMA ICS 7.1 - Safety standards for Construction and Guide for
Selection, Installation and Operation of Adjustable Speed Drive
Systems.
• IEC 146 - International Electrical Code.
The drive is designed to meet applicable requirements of the following codes/
standards:
• IEC 61800-2 Adjustable speed electrical power drive systems - General
requirements
• IEC 61800-5-1 Adjustable speed electrical power drive systems - Safety
requirements
• NFPA 70 - US National Electrical Code
(1) Applied noise impulses may be counted in addition to the standard pulse train causing erroneously high [Pulse Freq] readings.
N223
II 2 G/D
TUV
Rheinland
Product Safety
.
.
Production inspected
W
E
C
TUV
Rheinland
.
.
Functional
Safety
Bauart geprüft
Type approved
EN 50178