Dimensions – Rockwell Automation 20D PowerFlex 700H and 700S Frame 9...14 Drives User Manual
Page 103
Rockwell Automation Publication PFLEX-IN006E-EN-P - July 2013
103
Frame 12 Mechanical Installation
Chapter 8
Dimensions
Figure 39 - Enclosure Code A (NEMA/UL Type 1 - IP21) and M (NEMA/UL Type 1, IP21 w/Conformal
Coat)
2234.0
(87.95)
32.3
(1.27)
42.0
(1.65)
498.0
(19.61)
605.5
(23.84)
632.5*
(24.90)
2275.0
(89.57)
1205.05
(47.45)
534.7
(21.05)
87.9
(3.5)
2202.75
(86.72)
116 (4.5)
Gap with
Overlapping
Plate Removed
57.2
(2.3) Standard
73.3 (2.9)
Max.
144.5
(5.7)
439
(17.3)
Dimensions are in millimeters and (inches).
* This dimension is the depth for drives with the
optional door-mounted HIM installed.
Stationary metal front bottom plate
Two pieces of soft foam taped to adjacent metal plates
Overlapping metal bottom plate (slightly adjustable)
Stationary metal back bottom plate
Wire entry for this enclosure is between two pieces of soft foam. If the adjustable plate is slid back, a gap develops between the foam
pieces. Otherwise, the foam acts as a loose gasket around the wires.