Rockwell Automation 20D PowerFlex 700H and 700S Frame 9...14 Drives - Manual (Page 3)

Rockwell Automation Publication PFLEX-IN006E-EN-P - July 2013 3
Summary of Changes
This manual contains new and updated information.
New and Updated
Information This table contains the changes made to this revision.
Changes to this manual for previous revisions are included in Appendix F
History of Changes on page
209 .
Topic Page
Added enclosure code H “IP54, NEMA/UL Type 12” for PowerFlex 700S drives to
the Enclosure options table. 12
Updated the list of manuals in the Additional Resources table. 17
Updated the DC Input Precharge Control Wiring information. 26
Added a new Auto/Manual example when using PowerFlex 700H firmware
version 5.004. 42
Removed the chapter on Control Wiring for PowerFlex 700S Drives with Phase I
Control –
Removed the “Lifting and Mounting Instructions” appendix - updated all
references to refer to the appropriate Lifting and Mounting publications shipped
with the drives for current information. –
Updated the recommended cable and wiring diagrams for the Stegmann Hi-
Resolution Encoder Feedback Option Card to include new motor/cable
combination. 186
Updated the recommended cable and wiring diagrams for the Multi-Device
Interface Option Card to include new motor/cable combination. 196
Added Appendix F - History of Changes to contain all previous manual revision
information. 209