Rockwell Automation 20D PowerFlex 700H and 700S Frame 9...14 Drives - Manual (Page 108)

108 Rockwell Automation Publication PFLEX-IN006E-EN-P - July 2013
Chapter 8 Frame 12 Mechanical Installation
Remove the Protective Covers
You must remove the protective covers to gain access to the power structure.
Task Description
Remove the four M5 POZIDRIV screws that secure the top and bottom protective covers to the main front
protective cover, then remove the top and bottom protective covers.
Note: you only need to remove the top and bottom covers to gain access to the power terminals. You can
remove the other covers without removing the top and bottom ones.
Remove the four M5 POZIDRIV screws that secure the main front protective cover to the drive, then remove
the protective cover.
Remove the side protective covers.
A
B
C
A
B
A
A
A
B
C
B
B
C