Rockwell Automation 2080-LC50 Micro830 and Micro850 Programmable Controllers User Manual User Manual
Page 173
Rockwell Automation Publication 2080-UM002F-EN-E - December 2013
157
Specifications Appendix A
Wire size
0.2…2.5 mm
2
(24…12 AWG) solid copper wire or
0.2…2.5 mm
2
(24…12 AWG) stranded copper wire
rated @ 90 °C (194 °F ) insulation max
Wiring category
(1)
2 – on signal ports
2 – on power ports
Wire type
Use Copper Conductors only
Terminal screw torque
0.6 Nm (4.4 lb-in) max
(using a 2.5 mm (0.10 in.) flat-blade screwdriver)
Input circuit type
12/24V sink/source (standard)
24V sink/source (high-speed)
Output circuit type
Relay
24V DC sink (standard and high-
speed)
24V DC source (standard and high-
speed)
Event input interrupt support Yes
Power consumption
12.32 W
Power supply voltage range
20.4…26.4V DC Class 2
I/O rating
Input 24V DC, 8.8 mA
Output 2 A, 240V AC, general use
Input 24V DC, 8.8 mA
Output 24V DC, Class 2, 1 A per point (Surrounding air temperature 30 °C)
24 V DC, Class 2, 0.3 A per point (Surrounding air temperature
65 °C)
Isolation voltage
250V (continuous), Reinforced Insulation
Type, Outputs to Aux and Network, Inputs
to Outputs
Type tested for 60 s @ 720V DC, Inputs to
Aux and Network, 3250 V DC Outputs to
Aux and Network, Inputs to Outputs
50V (continuous), Reinforced Insulation Type, I/O to Aux and Network, Inputs
to Outputs
Type tested for 60 s @ 720V DC, I/O to Aux and Network, Inputs to Outputs
Pilot duty rating
C300, R150 (2080-LC30-24QWB only)
—
Insulation stripping length
7 mm (0.28 in.)
Enclosure type rating
Meets IP20
North American temp code
T4
(1) Use this Conductor Category information for planning conductor routing. Refer to Industrial Automation Wiring and Grounding Guidelines
General Specifications – 2080-LC30-24QWB, 2080-LC30-24QVB, 2080-LC30-24QBB
Attribute
2080-LC30-24QWB
2080-LC30-24QVB
2080-LC30-24QBB
Inputs
Attribute
High-Speed DC Input
(Inputs 0…7)
Standard DC Input
(Inputs 8 and higher)
Number of Inputs
8
6
Voltage category
24V DC sink/source
Operating voltage range
16.8…26.4V DC
10…26.4V DC
Off-state voltage, max
5V DC
Off-state current, max
1.5 mA
On-state current, min
5.0 mA @ 16.8V DC
1.8 mA @ 10V DC
On-state current, nom
8.8 mA @ 24V DC
8.5 mA @ 24V DC
On-state current, max
12.0 mA @ 30V DC